So here we go… A British Thermal Unit (BTU) is a measurement of heat energy. One BTU is the amount of heat energy required to raise one pound of water by 1ºF. Water weighs 8.33 pounds per gallon so we can calculate that one gallon of water requires 8.33 BTU to raise the temperature 1ºF.

## How many BTUs does it take to boil 1 pound of water?

That one pound of water must absorb 970 Btu’s before it all turns to steam, and will stay at 212°F during the process. That’s one match required to raise the temperature by one degree, and then almost 1,000 matches to boil off the water while not raising the temperature.

## Is 18000 Btu enough for cooking?

Middle: 2,000–10,000 BTUs. Mid-range BTUs are good for everyday cooking like sauteing and frying. High: 12,000–18,000 BTUs. These high BTU burners are meant for high heat cooking like searing and stir-frying.

## How many BTU does it take to boil 5 gallons?

There are 8.35*5=41.75 lbs in 5 gallons. To take water from 75 to 212 therefore requires: (212-75)*41.75=5720 BTU.

## How many BTUs will 1 gallon of water absorb?

The answer then is 1 gallon of water will absorb 1,251 BTUs going from ambient temperature (assumed to be 62o F) to 212o F.

## How many BTUs does it take to raise 1 degree?

It takes 0.24 BTU of heat to change the temperature of one pound of air by one degree F.

## How do you calculate BTUs of water?

Subtract the supply water temperature from the return water temperature to find the system temperature change. To find the system delivered BTU, multiply the BTU multiplier of 500 x the estimated Pump GPM x the System Temperature Change. Example: Say you calculate the pump pressure at 5.4 feet of head.

## How many BTUs do I need to heat 1500 square feet?

Size and Ceiling Height

Area To Be Cooled (square feet) | Capacity Needed (BTUs per hour) |
---|---|

1,200 to 1,400 | 23,000 |

1,400 to 1,500 | 24,000 |

1,500 to 2,000 | 30,000 |

2,000 to 2,500 | 34,000 |

## How many BTUs do I need to cook?

For most users, one power burner (12,000 BTUs or higher) is more than adequate—especially when paired with two medium-strength burners and one low burner for simmering. If you do a lot of cooking that requires quick high heat, such as stir-frying or searing, you may want to push the power up.

## Does higher Btu use more gas?

Natural gas and LP are sold by the BTU so the more BTU’s a burner uses per hour the more it will cost to burn the appliance. So all in all, while you generally want a high BTU measure for your gas fire pit or fireplace, other factors are also important to consider when purchasing the right fire pit for you!

## How long does it take to boil 6 gallons of water?

Depends on the BTU output of the burner, and a few other variables. Looks like that’s a Dark Star? If so, that’s comparable to the SQ14 I used to use. With that, it would take me about 45-50 minutes to get 6 or 7 gallons from room temp to a boil, and about 20-25 to go from mash temps to a boil.

## How many BTUs of energy in the form of heat can be absorbed by 1 gallon of water?

114 °F × 1 Btu/lb × 8.33 (Weight of 1 gallon of water) = 1,200 Btu.

## How many BTUs does it take to heat 1 gallon of water?

A British Thermal Unit (BTU) is a measurement of heat energy. One BTU is the amount of heat energy required to raise one pound of water by 1ºF. Water weighs 8.33 pounds per gallon so we can calculate that one gallon of water requires 8.33 BTU to raise the temperature 1ºF.

## How many BTUs would you need to raise 45 pounds of water 18?

Using the same logic, you can heat 45 pounds of water by 2 degrees with 245=90 BTU. And you can heat it by 18 degrees with 4518 BTU.